Overview

The KIEN1009 series are Kyland new ultra low power consumption Green Ethernet solution. Its full load power consumption is as low as 3.5 watts. The KIEN1009 switches are available with a standard operating temperature range from 0 to 60°C, or with a wide operating temperature range from -40 to 85°C. All models are with IP40 protection class and meet EMC industrial level 4 requirements.

KIEN1009 series support IEEE 802.3i, IEEE802.3u and IEEE802.3x with 10/100M full/half-duplex, MDI/MDI-X auto-sensing. The KIEN1009 switches provide 24VDC(18-36VDC)(KIEN1009-8T-E) 12VDC (9-36VDC), 24VAC/DC (13-50VAC, 18-72VDC)(others). These switches are specially designed for harsh industrial environments certified by UL508 and UL Class 1 Div 2 certifications.

Datasheet + Order code

1. Datasheet
2. Hardware Installation Guide

Key Features

1. Green Ethernet solution with ultra low power consumption design
2. As low as 3.5 watts full load power consumption
3. 1 Gigabit SFP slot, 6 10/100Base-TX ports and 3 Fast Ethernet fiber/RJ45 optional ports
4. Redundant AC/DC power inputs with wide voltage range
5. Both standard and wide operating temperature
6. EMC performance reaches industrial level 4
7. IP40 protection class
8. UL508 (pending), Class 1 Div 2 (pending), CE, FCC certificates

Standard
IEEE 802.3i
IEEE 802.3u

Switch Properties
MAC Table: 8K
Packet Buffer: 1Mbit
Packet Forwarding Rate: 1.4Mpps
Switching Delay: <5μs

Interface
Gigabit Ethernet Ports: max 1 1000Base SFP slot
Fast Ethernet Fiber Ports: max 3 100Base-FX, SM/MM ports, FC/SC/ST connector
Fast Ethernet RJ45 Ports: max 8 10/100Base-TX RJ45 ports

LED
LEDs on Front Panel:
Power LED: PWR (KIEN1009-E-8T)
PWR1, PWR2 (other models)
Interface LED: Link/ACT, Speed (RJ45 port)

Transmission Distance
Twisted Pair:
100m (Standard CAT5, CAT5e network cable)
Multi Mode Fiber:
1310nm, 5km (100M)
850nm, 550m (1000M)
Single Mode Fiber:
1310nm, 40km/60km (100M)
1550nm, 60km/80km (100M)
1310nm, 10km/40km (1000M)
1550nm, 60km/80km (1000M)

Power Requirements
Power Input:
24VDC (18-36VDC) (KIEN1009-E-8T);
12VDC (9-36VDC), 24VAC/DC (18-50VAC/18-72VDC) (other models) Power Terminal:
3-pin 5.08mm-spacing plug-in terminal block (KIEN1009-E-8T);
5-pin 5.08mm-spacing plug-in terminal block (other models) Power Consumption:
KIEN1009-8T: 3.5W
KIEN1009-E-8T: 3.5W
KIEN1009-1S/M-7T: 3.8W
KIEN1009-2S/M-6T: 4.1W
KIEN1009-3S/M-6T: 4.4W

Overload Protection: Support
Reverse Connection Protection: Support
Redundancy Protection: Support

Physical Characteristics
Housing: Metal, fanless
Protection Class: IP40
Dimensions (W×H×D):
53.6×135×106.5 mm (2.11×5.31×4.19 in.)
Weight: 0.76kg (1.676 pound)
Mounting: DIN-Rail or Panel mounting

Environmental Limits
Operating Temperature:
0 to 60°C (32 to 140°F) (KIEN1009-E-8T)
-40 to 85°C (-40 to 185°F) (other models)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)

MTBF
397,000 hrs

Warranty
5 years

Approvals
UL508 (pending), Class 1 Div 2 (pending), CE, FCC

Industrial Standard
EMI:
FCC CFR47 Part 15, EN55022/CISPR22, Class A

EMS:
IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air)
IEC61000-4-3 (RS): 10V/m (80MHz-2GHz)
IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV
IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV
IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz)
IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s)

Machinery:
IEC60068-2-6 (Vibration)
IEC60068-2-27 (Shock)
IEC60068-2-32 (Free Fall)

Industry: IEC61000-6-2
Railway: EN50155, EN50121-4